Certificate III in Automotive Mechanical Technology
(Mechanical-Heavy Vehicle Road Transport)
| Course Code: | AUR30405 |
| Department: | Heavy Vehicles & Engine Technology |
| Study Area(s): | Automotive |
| Location(s): | Docklands |
| Course Length: | Part-time day (3 years) Flexible (3 years) |
| Direct Entry: | You can apply for this course directly through Kangan Institute. |
Need more information?
Call us on 13 TAFE (13 8233)
or +613 9279 2222
Email us at enquiries@kangan.edu.au
Or fill in our feedback form
Print course
Course overview
This course will train you to work in heavy vehicle road transport. You will gain the skills and knowledge to competently carry out service , repair and diagnostic procedures.
Course modules
| CORE | ||
| Module Code | Module Title | Nominal Hours |
|---|---|---|
| AURC270103A | Apply Safe Working Practices | 20 |
| AURE218676A | Test, Service and Charge Batteries | 15 |
| AURE218708A | Carry Out Repairs to Single Electrical Circuits | 40 |
| AURE319166A | Repair Charging Systems | 30 |
| AURE319266A | Repair Starting Systems | 30 |
| AURT200108A | Carry Out Servicing Operations | 20 |
| AURT201164A | Remove and Install Engine Assemblies | 30 |
| AURT201170A | Inspect and Service Engines | 20 |
| AURT202166A | Repair Cooling Systems | 20 |
| AURT202170A | Inspect and Service Cooling Systems | 10 |
| AURT203670A | Service Diesel Fuel Injection Systems | 20 |
| AURT204670A | Inspect and Service Emission Control Systems | 10 |
| AURT206670A | Inspect and Service Transmissions (Manual) | 10 |
| AURT209170A | Service Hydraulic Systems | 20 |
| AURT210170A | Inspect and Service Braking Systems | 20 |
| AURT211170A | Inspect and Service Air Braking Systems | 20 |
| AURT212670A | Service Final Drive Assemblies | 5 |
| AURT213170A | Service Final Drive (Driveline) | 5 |
| AURT215170A | Inspect and Service Steering Systems | 10 |
| AURT217108A | Carry Out Wheel Alignment Operations | 40 |
| AURT225667A | Use and Maintain Measuring Equipment | 15 |
| AURT270278A | Use and Maintain Workplace Tools and Equipment | 20 |
| AURT271781A | Implement and Monitor Environmental Regulations in The Automotive Mechanical Industry | 20 |
| AURT301166A | Repair Engines and Associated Engine Components | 60 |
| AURT303666A | Repair Diesel Fuel Systems | 80 |
| AURT304666A | Repair and Replace Emission Control Systems | 20 |
| AURT305671A | Inspect and Repair Engine Forced Induction Systems | 15 |
| AURT306170A | Inspect, Service and/or Repair Clutch Assemblies and Associated Operating System Components | 30 |
| AURT306666A | Repair Transmissions (Manual) | 40 |
| AURT310166A | Repair Hydraulic Braking Systems | 40 |
| AURT311166A | Repair Air Braking Systems | 50 |
| AURT312666A | Repair Final Drive Assemblies | 20 |
| AURT313166A | Repair Final Drive (Driveline) | 20 |
| AURT315166A | Repair Steering Systems | 30 |
| AURT316166A | Repair Suspension Systems | 30 |
| AURT366108A | Carry Out Diagnostic Procedures | 20 |
| MEM5.17AB | Weld Using Gas Metal Arc Welding Process | 40 |
| MEM5.4AB | Perform Routine Oxy Acetylene Welding | 20 |
| MEM5.7AB | Manual Heating and Thermal Cutting | 20 |
| Total hours: | 985 | |
Course Fees
Are you eligible for Government Subsidised fees? Find out now!
You may be eligible for concession. Find out now!
| Government Subsidised | Fee For Service (Full fee) | |||||
|---|---|---|---|---|---|---|
| Concession | Non concession | RPL | Concession | Non concession | RPL | |
| Tuition fees | $ 188 | $ 990^ | $ 95 | n/a | $ 6,500^ | $ 3,250^ |
| Student Services & Amenities Fees | $ 32 | $ 212^ | n/a | n/a | n/a | n/a |
| Ancillary Fees | $ 26 | $ 26 | n/a | n/a | n/a | n/a |
^ Fees will not be more than stated.
* Approximate fees displayed are based on calendar year calculations. The fees apply to the units enrolled in 2012 only. Any enrolments in subsequent years will be charged at the rates applicable for that year.
* Materials fees may be required.
How to calculate fees? See the examples here.
| Tuition fee | Student Services & Amenities Fees | Ancillary Fees | Total | |
|---|---|---|---|---|
| Example 1: | A student is enrolled in a Skills Building program with 200 nominal hours. | |||
| Government subsidised (Non concession) | $1.75 x 200 = $350.00 | $0.32 x 200 = $64.00 | $26.00 | $440.00 |
| Fee-For-Service (Non concession) | $8.00 x 200 = $1,600.00 | n/a | n/a | $8.00 x 200 = $1,600.00 |
| Fee-For-Service (RPL) | $4.00 x 200 = $800.00 | n/a | n/a | $4.00 x 200 = $800.00 |
| Example 2: | A student is enrolled in a Skills Building program with 900 nominal hours. | |||
| Government subsidised (Non concession) | $1.75 x 900 = $1,575.00 but capped at the maximum of $990.00 | $0.32 x 900 = $288.00 but capped at the maximum of $212.00 | $26.00 | $1,228.00 |
| Fee-For-Service (Non concession) | $8.00 x 900 = $7,200.00 but capped at the maximum of $6500.00 | n/a | n/a | $6500.00 |
| Fee-For-Service (RPL) | $4.00 x 900 = $3,600.00 but capped at the maximum of $3250.00 | n/a | n/a | $3250.00 |
See the detailed fees structure.
What costs and other fees should I expect?
Contact the Call Centre on 13 TAFE (13 8233) for a fee schedule.
What employment opportunities will I have?
With a Certificate III, plus appropriate workplace training, you may obtain work as a registered tradesperson in the retail, service and repair sector of the automotive industry, with heavy vehicle road transport.
What skills will I have when I complete this course?
Certificate III programs are the same as apprenticeships. People who successfully complete the certificate III will be recognised as registered tradespeople in heavy vehicle mechanics.
What qualifications will I receive?
On successful completion you will be awarded the Certificate lll in Automotive (Mechanical - Heavy Vehicle Road Transport). As part of the Australian Qualifications Framework this program is nationally recognised.
What opportunities for further studies will I have?
This course leads to advanced study in the automotive field at certificate lV or diploma level automotive courses.
Can I apply?
You are eligible to apply if you are 15 years or older and have been offered an apprenticeship in this field.
Entry to this course is via rolling enrolments.
How do I apply?
New Apprentices/Trainees will first need to be employed and signed up to a “Contract of training” by an Australian Apprenticeship Centre (AAC).These AAC’s are located in Metropolitan and regional centres.
For locations visit http://www.australianapprenticeships.gov.au/ If this has already been done, and Kangan Institute has been listed as the preferred provider on the contract of training the Institute will contact you once your contract has been registered with Skills Victoria.
If you wish to contact the Institute for further information please contact the Call Centre on 13 TAFE (13 8233).
How will I be selected for this course?
Applicants must be currently employed as an apprentice/trainee in this field of specialisation.
How long is the course?
The program is run over three years, with 320 hours of classes a year. But the New Apprenticeship system offers you the flexibility to accelerate your progress, by: gaining credits from another program, attending more classes, taking material home for home study, sourcing materials from the internet, having your skills assessed in your workplace.
Where and how can I study?
For the rest of 2011, this course may be offered at the Coburg campus. As of 2012, all automotive courses will be run from our ACE campus in Docklands. You can do your training by block ( 2 weeks every six weeks) or day release or at your workplace.
How will I be assessed?
You are required to be assessed in this program, to show that you have achieved the skills and knowledge set out in the competency standards/modules.
Assessment may include a combination of written, oral or practical assessment methods. You will be informed in advance about the assessment procedure and criteria. There will also be opportunity for appeal and reassessment and you will be provided with this information.
Additional comments
The course consists of seventeen compulsory competencies and a further nineteen competencies chosen by the employer to suit the workplace.
What will I study?
Heavy Vehicles, Heavy Vehicle, Mechanic, Trucks, Tractor, Bus, Semi, Road Transport, Apprentice Heavy Vehicles, Diesel Mechanic, Truck Mechanic, Motor Mechanic, Bus Mechanic, Air Brakes, Diesel Mechanic, Heavy Vehicle Road Worthy, LPG, CNG
