CERTIFICATE III IN MARINE MECHANICAL TECHNOLOGY

CERTIFICATE III IN MARINE MECHANICAL TECHNOLOGY

Course Code
:
AUR30512
Department
:
AUTOMOTIVE GROUP OF DEPARTMENTS
Study Area(s)
:
Automotive
Campus
:
DOCKLANDS
Course Length
:
Part-time day(3 years)

Start Date(s): 2018 commencement is 22 January 2018.
We offer rolling enrolments. Enrol at any time.
End Date(s): Generally an apprenticeship take 3 years of schooling and 1 year on the job training
Days and Time: Apprenticeship: Block release is available. You will attend classes for one week approximately every two months. Monday to Thursday 8am - 4.30pm and Friday 8am - 1pm
Non Apprentice: Program will be customised to suit your requirements.

Course Overview

The Certificate III in Marine Mechanical Technology course equips students with skills in maintenance, repair, and diagnostic testing of marine engines.

This automotive course will give you the knowledge and skills to gain employment working with boat engines and other mechanical equipment in the Retail Service and Repair sector in the marine industry.

Click here for course modules

Core

Module CodeModule TitleNominal Hours
AURASA2002Apply Safe Working Practices In An Automotive Workplace20
AURREA3002Monitor Environmental And Sustainability Best Practice In The Marine Mechanical Industry25
AURRTE3005Diagnose And Repair Marine Electrical Systems And Components20
AURRTE3006Diagnose And Repair Outboard Engines And Components40
AURRTE3007Diagnose And Repair Inboard Engines And Components40
AURRTE3008Install Marine Engines, Controls And Instruments55
AURRTQ3003Install Inboard Propeller Drive Systems40
AURRTQ3004Diagnose And Repair Inboard Propeller Drive Systems25
AURRTR3002Install Marine Electronic Systems And Components15
AURRTR3004Install Marine Electrical Systems And Components10
AURRTX3003Diagnose And Repair Marine Outboard And Stern Drive Transmissions30
AURTTF3006Diagnose And Repair Petrol Carburettor Systems50
AURTTK2002Use And Maintain Workplace Tools And Equipment20


How will I be assessed?

You will be assessed to show that you have achieved the skills and knowledge required by the course. Assessment may include written, oral or practical assessment methods and may take place in your workplace. You will be advised in advance about the type of assessment and how it will operate. There is the opportunity for re-assessment and appeal and you will be provided with this information.

Additional comments

The course consists of sixteen compulsory competencies and a further twenty competencies chosen by the employer to suit the workplace. All automotive courses will be run from our ACE campus in Docklands. You can choose to study on block (one week every six weeks approximately), day release or in your workplace.

What will I study?

Marine mechanical technology.

For course information, please call 13 TAFE (13 8233) or fill our enquiry form.

 

For Business and Industry


We offer our business and industry clients customised workforce training, flexible delivery (when and where it suits you) and onsite assessments.

Call us on 1300 615 141 or contact us online for an obligation free consultation.

This training is delivered with Victorian and Commonwealth Government funding. Are you eligible for Government Subsidised fees? Find out now!

You may be eligible for concession. Find out now!

The fees listed below relate to 2017 courses and are indicative pricing only as total costs vary depending on the units you elect to study.

Concessions for Diploma and Advanced Diploma course categories are only available to Aboriginal or Torres Strait Islanders.

Payment plans are available. Click here to find out more.
Course availability is subject to enrolment numbers.

Your total course fee will typically include your tuition fee (table 1), any applicable consumables and/or material fees (table 2) and non-tuition fees such as student support fees (table 3).

Table 1

Enrolment type
 
 
 
Government Subsidised
Average annual course fee#
 
Concession
Average annual course fee#
Check your eligibility
Full Fee
Average annual course fee#
 
Non-Apprentice
$0.0
$
$
Apprentice/Trainee
$960
$192
$4000

Table 2

Material Fees
per SC hour :
$0.5625
Consumable Fees
per SC hour :
$0.36

# The student tuition fees as published are subject to change given individual circumstances at enrolment.
Average tuition fees are based on the typical number of student contact hours undertaken by a student to complete this course. Average fees displayed are purely indicative and may not be your actual fee. Fees vary based on the number/hours of electives chosen by the student.

Click here to view maximum tuition fees. We strongly urge you to contact us for a more exact calculation of your fees. Additional fees may apply such as the Student Support Fee. 

2017 Student Services Fee (Table 3)

 Type of cohort:
Eligible full fee paying student (more than 125 SC hours) Non eligible/FFS  full fee paying student (more than 125 SC hours) Special cohort classes:
  • Concession card holders
  • Apprentices
  • Trainees
  • Work based students (100% off campus delivery)
  • Full online delivery (100% off campus delivery)
Any students studying less than 125 hours in the full year
Domestic student services fees for 2017: $0.40 per student contact hour. $60 min total to $200 max total $0.40 per student contact hour. $60 min total to $200 max total $60 fixed fee None

Exemptions

The following fee categories are exempt from the SSF -
ASH: Asylum Seeker Or Victim Of Human Trafficking Concession
ASZ: Asylum Seeker Or Victim Of Human Trafficking Non-concession
X: Community-based Orders/Judy Lazarus Transition Centre
OZ: International Student
M: Prisoner
YTC: Young People Transitioning From Care – Concession
YTN: Young People Transitioning From Care - No Concession
Short courses

student contact hours

Total hours^ Indicative hours* Government Subsidised $/SCH Indigenous Concession $/SCH Full fee $/SCH
1080 320 $3.00 $0.60 $12.50

^This is based on the maximum number of student contact hours for the total duration of the course. Hours may vary depending on electives chosen by the student.

*This is based on the maximum number of student contact hours for the calendar year of 2017. Hours may vary depending on electives chosen by the student.If you have to undertake training as part of Skills Recognition, your tuition fees are charged according to the applicable rate per Student Contact Hour depending on your eligibility for government subsidised, concession or full fees.

For more information about our fees structure, click here.

What costs and other fees should I expect?

Contact the Contact Centre on 13 TAFE (13 8233) or enquiries@kangan.edu.au for a fee schedule. There may be extra costs for reference books, protective clothing or specialised materials.

Can I apply?

Applicants must be currently employed as an apprentice/trainee in the marine industry. Entry to this course is via rolling enrolments.

Where and how can I study?

All automotive courses will be run from our ACE campus in Docklands. You can choose to study on block (one week every six weeks approximately), day release or in your workplace.

What employment opportunities will I have?

This course may lead to work within the Retail, Service and Repair sector of the marine industry.

What skills will I have when I complete this course?

You will gain skills in the maintenance, repair and diagnostic testing of marine engines.

What qualifications will I receive?

On successful completion you will receive a Certificate III in Marine Mechanical Technology. As part of the Australian Qualifications Framework this program is nationally recognised.

What opportunities for further studies will I have?

This course leads to advanced study in automotive Certificate IV or Diploma courses.

How do I apply?

New Apprentices/Trainees will first need to be employed and signed up to a Contract of Training by an Australian Apprenticeship Support Network (AASN) provider, with Kangan Institute listed as the preferred provider. For locations visit australianapprenticeships.gov.au. For further information call us on 13 TAFE (13 8233) or email enquiries@kangan.edu.au.

How will I be selected for this course?

Applicants must be currently employed as an apprentice/trainee in the marine industry.