Certificate III In Solid Plastering

Certificate III In Solid Plastering

Course Code
:
CPC31011
Department
:
Construction & Engineering
Study Area(s)
:
External Delivery, Building and Construction, Onsite Training
Campus
:
BROADMEADOWS, ONLINE, WORKPLACE DELIVERY
Course Length
:
Flexible(1 year)

Start Date(s): Any time of the year as long as you meet the entry requirements: You need to be working in the industry and have access to a live work site.
End Date(s): 12 months
Days and Time: On site delivery

Course Overview

Due to current COVID-19 restrictions, we have adapted our course delivery to now encompass a combination of remote and flexible delivery methods. This includes easy to navigate online tutorials, video conferencing (classroom simulation) as well as face-to-face practical assessments and work placements – where safe and practical to implement. Therefore, you will require access to the internet and a computer to undertake this course.

Our flexible model allows you to continue to study in a safe, guided and fully supported manner with continued access to all learning, personal and wellbeing supports.

You will be advised by your facilitator on a case by case basis in relation to practical and work placement assessments, as some flexibility will be required during this challenging time.

This course is designed for those working in the construction trades as a renderer. Delivered on-site* in a flexible way that suits your work, we will come to your work site
and assess you while you are working. The delivery is designed to fit in with a modern working environment including online content
and workplace simulations.

*You may be required to attend practical training days held at the Broadmeadows campus. These days are typically designed to work around your work schedule with many of the dates set around the industry RDO calendar.

Click here for course modules


Elective

Module CodeModule TitleNominal Hours
CPCCCM1012AWork effectively and sustainably in the construction industry (CPCCCM1012A)20
CPCCCM1013APlan And Organise Work (CPCCCM1013A)20
CPCCCM1014AConduct Workplace Communication (CPCCCM1014A)20
CPCCCM1015ACarry Out Measurements And Calculations (CPCCCM1015A)20
CPCCCM2001ARead And Interpret Plans And Specifications (CPCCCM2001A)36
CPCCCM2006AAPPLY BASIC LEVELLING PROCEDURES (CPCCCM2006A)8
CPCCCM2006BApply Basic Levelling Procedures (CPCCCM2006B)8
CPCCCM2008AERECT AND DISMANTLE RESTRICTED HEIGHT SCAFFOLDING (CPCCCM2008A)40
CPCCCM2008BErect And Dismantle Restricted Height Scaffolding (CPCCCM2008B)40
CPCCCM2010BWork Safely At Heights (CPCCCM2010B)8
CPCCCM3001COperate Elevated Work Platforms (CPCCCM3001C)32
CPCCOHS2001AApply Ohs Requirements, Policies And Procedures In The Construction Industry (CPCCOHS2001A)20
CPCCPB3006AFix Fibre Cement Board (CPCCPB3006A)20
CPCCPB3008AMix Plastering Compounds (CPCCPB3008A)20
CPCCPB3012ACut And Fix Paper-faced Cornices (CPCCPB3012A)40
CPCCPB3026BErect And Maintain Trestle And Plank Systems (CPCCPB3026B)10
CPCCSP2001AHandle Solid Plastering Materials (CPCCSP2001A)8
CPCCSP2002AUse Solid Plastering Tools And Equipment (CPCCSP2002A)80
CPCCSP2003APrepare Surfaces For Plastering (CPCCSP2003A)40
CPCCSP3001AApply float and render to straight and curved surfaces (CPCCSP3001A)100
CPCCSP3002AApply Set Coats (CPCCSP3002A)40
CPCCSP3003AApply Trowelled Texture Coat Finishes (CPCCSP3003A)80
CPCCSP3004ARestore And Renovate Solid Plasterwork (CPCCSP3004A)120
CPCCSP3005AInstall Pre-cast Decorative Mouldings (CPCCSP3005A)120
CPCCSP3006AInstall Cast Plaster Blockwork (CPCCSP3006A)16
CPCCSP3007AApply plaster by projection machine (CPCCSP3007A)32

How will I be assessed?

You will be assessed to show that you have achieved the skills and knowledge required by the course. Assessment may include written, oral or practical assessment methods. You will know in advance about the type of assessment and how it will operate. There is the opportunity for reassessment and appeal and you will be given this information.

What will I study?

Please see list of course modules above.

For course information, please call 13 TAFE (13 8233) or fill our enquiry form.

Click here to find out more about our Online Service Standards.

For information on disability support at Kangan Institute, click here.

This training is delivered with Victorian and Commonwealth Government funding. Are you eligible for Government Subsidised fees? Find out now!

You may be eligible for concession. Find out now!

The fees listed below relate to 2021 courses and are indicative pricing only as total costs vary depending on the units you elect to study.

Concessions for Diploma and Advanced Diploma course categories are only available to Aboriginal or Torres Strait Islanders.

Payment plans are available. Click here to find out more.
Course availability is subject to enrolment numbers.

Your total course fee will typically include your tuition fee (table 1), any applicable consumables and/or material fees (table 2) and non-tuition fees such as student support fees (table 3).

Table 1

Enrolment type
 
 
 
Government Subsidised
Indicative total tuition fee#
 
Concession
Indicative total tuition fee#
Check your eligibility
Full Fee
Indicative total tuition fee#
 
Non-Apprentice
$2851.44
$566.80
$11580.16
Apprentice/Trainee
$N/A
$N/A
$N/A

Table 2

Average course
material fees*

$436.00

Average course
consumable fees*
$0.00

# The student tuition fees as published are subject to change given individual circumstances at enrolment.
* Materials/Consumables fees may vary for each individual based on the units they are studying.
Average tuition fees are based on the typical number of student contact hours undertaken by a student to complete this course. Average fees displayed are purely indicative and may not be your actual fee. Fees vary based on the number/hours of electives chosen by the student.

Click here to view maximum tuition fees. We strongly urge you to contact us for a more exact calculation of your fees. Additional fees may apply such as the Student Support Fee. 

2021 Student Services Fee (Table 3)


 Type of cohort:

Eligible full fee paying student (more than 125 SC hours) Non eligible/FFS  full fee paying student (more than 125 SC hours) Special cohort classes:
  • Concession card holders
  • Apprentices
  • Trainees
  • Work based students (100% off campus delivery)
  • Full online delivery (100% off campus delivery)
Any students studying less than 125 hours in the full year
Domestic student services fees for 2021: $0.40 per student contact hour. $60 min total to $200 max total $0.40 per student contact hour. $60 min total to $200 max total $60 fixed fee None

Exemptions

The following fee categories are exempt from the SSF -
ASH: Asylum Seeker Or Victim Of Human Trafficking Concession
ASZ: Asylum Seeker Or Victim Of Human Trafficking Non-concession
X: Community-based Orders/Judy Lazarus Transition Centre
OZ: International Student
M: Prisoner
YTC: Young People Transitioning From Care – Concession
YTN: Young People Transitioning From Care - No Concession
Short courses

student contact hours

Total hours^ Indicative hours* Government Subsidised $/SCH Indigenous Concession $/SCH Full fee $/SCH
872 872 $3.27 $0.65 $13.28

^This is based on the maximum number of student contact hours for the total duration of the course. Hours may vary depending on electives chosen by the student.

*This is based on the maximum number of student contact hours for the calendar year of 2021. Hours may vary depending on electives chosen by the student. If you have to undertake training as part of Skills Recognition, your tuition fees are charged according to the applicable rate per Student Contact Hour depending on your eligibility for government subsidised, concession or full fees.

For more information about our fees structure, click here.

What costs and other fees should I expect?

Contact the Contact Centre on 13 TAFE (13 8233) or enquiries@kangan.edu.au for a fee schedule. There may be extra costs for reference books, protective clothing or specialised materials.

Can I apply?

To be eligible for this course you must be currently working in the industry as a renderer, with a minimum 5 years experience and access to a live worksite. You must also satisfy the prerequisite numeracy and literacy skills.

Where and how can I study?

An assessor will come to your worksite.

You may be required to attend practical training days held at the Broadmeadows campus. These days are typically designed to work around your work schedule with many of the dates set around the industry RDO calendar.

Due to current COVID-19 restrictions, we have adapted our course delivery to now encompass a combination of remote and flexible delivery methods. This includes easy to navigate online tutorials, video conferencing (classroom simulation) as well as face-to-face practical assessments and work placements – where safe and practical to implement. Therefore, you will require access to the internet and a computer to undertake this course.

Our flexible model allows you to continue to study in a safe, guided and fully supported manner with continued access to all learning, personal and wellbeing supports.

You will be advised by your facilitator on a case by case basis in relation to practical and work placement assessments, as some flexibility will be required during this challenging time.

What employment opportunities will I have?

Upon completion, you will be a qualified renderer allowing you to work nationally.

What qualifications will I receive?

On successful completion of the course you will be awarded the Certificate III in Solid Plastering (CPC31011). As part of the Australian Qualifications Framework this program is nationally recognised.

What opportunities for further studies will I have?

This course will lead to higher level studies, Certificate IV in Building and Construction (Building) (CPC40110) which will help you become a qualified builder.

How do I apply?

To apply for this course you must fill in a direct application form which can be obtained from the institute by calling the Contact Centre on 13 TAFE (13 8233) or email enquiries@kangan.edu.au. This course may also have a mid-year intake.

How will I be selected for this course?

An assessor will conduct a site visit and interview.