Due to current COVID-19 restrictions, we have adapted our course delivery to now encompass a combination of remote and flexible delivery methods. This includes easy to navigate online tutorials, video conferencing (classroom simulation) as well as face-to-face practical assessments and work placements – where safe and practical to implement. Our flexible model allows you to continue to study in a safe, guided and fully supported manner with continued access to all learning, personal and wellbeing supports. You will be advised by your facilitator on a case by case basis in relation to practical and work placement assessments, as some flexibility will be required during this challenging time.
All students required to attend on-site learning must be fully vaccinated in line with Kangan Institute’s Vaccination Policy
This course is designed for those working in the construction trades as a solid plasterer (5+ years experience).
Delivered in a flexible way that suits your work, we will come to your work site and assess you while you are working. The delivery is designed to fit in with a modern working environment including online content and workplace simulations.
Click here for course modules
|Module Code||Module Title||Nominal Hours
|CPCCOM1014||Conduct workplace communication (CPCCOM1014)||20
|CPCCOM1015||Carry out measurements and calculations (CPCCOM1015)||20
|CPCCOM2001||Read and interpret plans and specifications (CPCCOM2001)||36
|CPCCOM1013||Plan and organise work (CPCCOM1013)||20
|CPCCOM1012||Work effectively and sustainably in the construction industry (CPCCOM1012)||20
|CPCCCM2008||Erect and dismantle restricted height scaffolding (CPCCCM2008)||40
|CPCCSP2001||Handle solid plastering materials (CPCCSP2001)||8
|CPCCSP2002||Use solid plastering tools and equipment (CPCCSP2002)||80
|CPCCSP2003||Prepare surfaces for plastering (CPCCSP2003)||40
|CPCCSP3001||Apply float and render to straight and curved surfaces (CPCCSP3001)||100
|CPCCSP3002||Apply set coats (CPCCSP3002)||40
|CPCCSP3003||Apply trowelled texture coat finishes (CPCCSP3003)||80
|CPCCSP3004||Restore and renovate solid plasterwork (CPCCSP3004)||120
|CPCCCM2006||Apply basic levelling procedures (CPCCCM2006)||8
|CPCCWHS2001||Apply WHS requirements, policies and procedures in the construction industry (CPCCWHS2001)||20
|Module Code||Module Title||Nominal Hours
|CPCCCM2012||Work safely at heights (CPCCCM2012)||8
|CPCCPB3026||Erect and maintain trestle and plank systems (CPCCPB3026)||10
|CPCCSP3005||Install pre-cast decorative mouldings (CPCCSP3005)||120
|CPCCSP3007||Apply plaster by projection machine (CPCCSP3007)||32
|CPCCSP3008||Carry out conite construction and wall sheet panelling (CPCCSP3008)||80
How will I be assessed?
You will be assessed to show that you have achieved the skills and knowledge required by the course. Assessments may include written, oral or practical assessment methods.
You will know in advance about the type of assessment and how it will operate. There is the opportunity for reassessment and appeal and you will be given this information.
What will I study?
To achieve this qualification, the candidate must demonstrate competency in:
Some or all of this training is provided with State or Federal Government funding. Are you eligible for Government Subsidised fees? Find out now!
You may be eligible for concession. Find out now!
To you check your eligibility click here.
Free TAFE and JobTrainer courses only: Students eligible for Free TAFE receive the tuition rate free. Students eligible for JobTrainer pay 20% of the tuition. Materials, consumables and student services fees are payable by all students and do not receive a JobTrainer discount, however concession rates for student services fees are available for concession card holders, apprentices, trainees and 100% off campus delivery courses. Please note that these tuition rates only apply to courses offered under the Free TAFE or JobTrainer schemes.
The fees listed below relate to 2022 courses and are indicative pricing only as total costs vary depending on the units you elect to study.
Concessions for Diploma and Advanced Diploma course categories are only available to Aboriginal or Torres Strait Islanders.
Payment plans are available. Click here to find out more.
Course availability is subject to enrolment numbers.
Your total course fee will typically include your tuition fee (table 1), any applicable consumables and/or material fees (table 2).
Indicative total tuition fee#
Indicative total tuition fee#
# The student tuition fees as published are subject to change given individual circumstances at enrolment.
* Materials/Consumables fees may vary for each individual based on the units they are studying.
Average tuition fees are based on the typical number of student contact hours undertaken by a student to complete this course. Average fees displayed are purely indicative and may not be your actual fee. Fees vary based on the number/hours of electives chosen by the student.
Click here to view maximum tuition fees. We strongly urge you to contact us for a more exact calculation of your fees. Additional fees may apply such as the Student Support Fee.
Your total course fee will typically include your tuition fee and non-tuition fees (table 1) and any applicable consumables and/or material fees (table 2).
The following fee categories are exempt from the SSF -
ASH: Asylum Seeker Or Victim Of Human Trafficking Concession
ASZ: Asylum Seeker Or Victim Of Human Trafficking Non-concession
X: Community-based Orders/Judy Lazarus Transition Centre
OZ: International Student
YTC: Young People Transitioning From Care – Concession
YTN: Young People Transitioning From Care - No Concession
student contact hours
Government Subsidised $/SCH
Indigenous Concession $/SCH
Full fee $/SCH
^This is based on the maximum number of student contact hours for the total duration of the course. Hours may vary depending on electives chosen by the student.
*This is based on the maximum number of student contact hours for the calendar year of 2022. Hours may vary depending on electives chosen by the student. If you have to undertake training as part of Skills Recognition, your tuition fees are charged according to the applicable rate per Student Contact Hour depending on your eligibility for government subsidised, concession or full fees.
For more information about our fees structure, click here.
What costs and other fees should I expect?
Contact the Contact Centre on 13 TAFE (13 8233) or firstname.lastname@example.org for a fee schedule. There may be extra costs for reference books, protective clothing or specialised materials.
Can I apply?
To be eligible for this program you must have a minimum of five years experience in the solid plastering industry and have access to a live work site as part of this delivery.
It is also recommended that you have satisfactory numeracy and literacy skills to undertake this course.
You will also need to undertake a Pre-Training Review.
Where and how can I study?
This course is delivered on site in a flexible way that suits your work, we will come to your work site and assess you there while you are working. The delivery is designed to fit in with a modern working environment. If there are areas of work you have not undertaken you may be required to attend workshops at the Broadmeadows campus, these workshops are also designed to work around your work schedule with many of the dates set around the industry RDO calendar.
What employment opportunities will I have?
This course offers formal training for people working in the industry
What skills will I have when I complete this course?
You will gain skills across a number of key areas of the construction industry as well as skills in specialised tasks working with solid plastering such as applying plaster, cement and other mixtures to walls to create smooth or decorative finishes to interior walls and to render to exterior walls.
What qualifications will I receive?
On successful completion of this course, you will be awarded the nationally accredited Certificate III Solid Plastering (CPC31020)
What opportunities for further studies will I have?
This course will lead to higher level studies, including the Certificate IV in Building and Construction which can assist with becoming a registered builder.
How do I apply?
To apply for this course, complete an online application form by clicking the yellow 'Apply Here' button above. For more information call 13 TAFE (13 8233) or email email@example.com.
How will I be selected for this course?
All applicants will need to be currently working in the industry and have access to a live job site for assessments.
All applicants for this course will complete an assessment to evaluate their language, literacy and numeracy (LLN) skills. This helps to ensure that you enrol in a course that is the right level of study for you.