Certificate II in Automotive Servicing Technology

Course Code

AUR20516

Department

Passenger Vehicles

Study Area(s)

Free TAFE, Automotive

Campus

DOCKLANDS

Course Length

Full-time(1 year)
Part-time day(2 years)

Click here to attend an information/enrolment session.

Start Date(s):	Rolling enrolments
End Date(s):	Rolling enrolments
Days and Time:	To be confirmed with your course advisor

Apply Here

Course Overview

This qualification reflects the role of individuals who perform a range of servicing tasks in the automotive retail, service and repair industry.

Free TAFE

You may be entitled to free tuition fees for this course if you meet the eligibility criteria for the State Government’s FREE TAFE for Priority Courses initiative. It's important to know that you may incur other fees, such as student services fees or materials fees, and you'll need to cover these costs yourself. To find out more, call 13 TAFE (13 8233) or contact us via our online enquiry form.

Click here for course modules

Elective

Module Code	Module Title	Nominal Hours
AURACA001	Respond to customer needs and enquiries in an automotive workplace	20
AURAEA002	Follow environmental and sustainability best practice in an automotive workplace	25
AURAFA001	Use numbers in an automotive workplace	10
AURAFA002	Read and respond to automotive workplace information	10
AURAFA003	Communicate effectively in an automotive workplace	20
AURAFA005	Write routine texts in an automotive workplace	10
AURAKA001	Use information technology systems	30
AURASA002	Follow safe working practices in an automotive workplace	20
AURATA001	Identify basic automotive faults using troubleshooting processes	20
AURETR012	Test and repair basic electrical circuits	40
AURETR015	Inspect, test and service batteries	10
AURETR025	Test, charge and replace batteries and jump-start vehicles	15
AURHTJ002	Select heavy vehicle tyres, wheels and rims for specific applications	20
AURHTJ006	Remove, inspect, repair and refit heavy vehicle tyres and tubes	40
AURJTJ001	Remove, inspect and refit motorcycle wheel and tyre assemblies	20
AURKTA005	Inspect, service and repair track type drive and support systems	30
AURKTD005	Diagnose complex faults in mobile plant steering and suspension systems	50
AURLTE001	Remove and install light vehicle engine assemblies	30
AURLTJ002	Remove, inspect, repair and refit light vehicle tyres and tubes	40
AURTTA004	Carry out servicing operations	20
AURTTA006	Inspect and service hydraulic systems	20
AURTTB001	Inspect and service braking systems	20
AURTTB004	Inspect and service air braking systems	20
AURTTC001	Inspect and service cooling systems	10
AURTTD002	Inspect and service steering systems	10
AURTTD004	Inspect and service suspension systems	10
AURTTE004	Inspect and service engines	20
AURTTF001	Inspect and service petrol fuel systems	25
AURTTF002	Inspect and service diesel fuel injection systems	20
AURTTJ001	Balance wheels and tyres	10
AURTTK001	Use and maintain measuring equipment in an automotive workplace	15
AURTTK001	Use and maintain measuring equipment in an automotive workplace	15
AURTTK002	Use and maintain tools and equipment in an automotive workplace	20
AURTTQ001	Inspect and service final drive assemblies	5
AURTTQ003	Inspect and service drive shafts	5
AURTTS001	Fabricate exhaust systems and components	60
AURTTX002	Inspect and service manual transmissions	10
AURTTX003	Inspect and service automatic transmissions	10
AURTTZ001	Inspect and service emission control systems	10
AURTTZ002	Diagnose and repair exhaust systems	10
AURVTW001	Carry out manual metal arc welding on components	30
AURVTW004	Carry out tungsten inert gas welding	30
AURVTW008	Carry out oxyacetylene welding, thermal heating and cutting	30
AURVTW009	Carry out basic gas metal arc welding	20

How will I be assessed?

You will be assessed to show that you have achieved the skills and knowledge required by the course. Assessment may include written, oral or practical assessment methods. You will be advised in advance about the type of assessment and the how it will operate. There is the opportunity for reassessment and appeal and you will be provided with this information.

For course information, please call 13 TAFE (13 8233) or fill our enquiry form.

For Business and Industry

We offer our business and industry clients customised workforce training, flexible delivery (when and where it suits you) and onsite assessments.

Call us on 1300 615 141 or contact us online for an obligation free consultation.

This training is delivered with Victorian and Commonwealth Government funding. Are you eligible for Government Subsidised fees? Find out now!

You may be eligible for concession. Find out now!

The fees listed below relate to 2019 courses and are indicative pricing only as total costs vary depending on the units you elect to study.

Concessions for Diploma and Advanced Diploma course categories are only available to Aboriginal or Torres Strait Islanders.

Payment plans are available. Click here to find out more.
Course availability is subject to enrolment numbers.

Your total course fee will typically include your tuition fee (table 1), any applicable consumables and/or material fees (table 2) and non-tuition fees such as student support fees (table 3).

Table 1

Enrolment type

Government Subsidised
Indicative total tuition fee#

Concession
Indicative total tuition fee#
Check your eligibility

Full Fee
Indicative total tuition fee#

Non-Apprentice

$0.00

$3420

Apprentice/Trainee

Table 2

Average course
material fees^*

$342

Average course
consumable fees^*

$114

Scholarships Payment Plans

# The student tuition fees as published are subject to change given individual circumstances at enrolment.
^* Materials/Consumables fees may vary for each individual based on the units they are studying.
Average tuition fees are based on the typical number of student contact hours undertaken by a student to complete this course. Average fees displayed are purely indicative and may not be your actual fee. Fees vary based on the number/hours of electives chosen by the student.

Click here to view maximum tuition fees. We strongly urge you to contact us for a more exact calculation of your fees. Additional fees may apply such as the Student Support Fee.

2019 Student Services Fee (Table 3)

	Type of cohort:
	Eligible full fee paying student (more than 125 SC hours)	Non eligible/FFS full fee paying student (more than 125 SC hours)	Special cohort classes: Concession card holders Apprentices Trainees Work based students (100% off campus delivery) Full online delivery (100% off campus delivery)	Any students studying less than 125 hours in the full year
Domestic student services fees for 2019:	$0.40 per student contact hour. $60 min total to $200 max total	$0.40 per student contact hour. $60 min total to $200 max total	$60 fixed fee	None

Exemptions

The following fee categories are exempt from the SSF -
ASH: Asylum Seeker Or Victim Of Human Trafficking Concession
ASZ: Asylum Seeker Or Victim Of Human Trafficking Non-concession
X: Community-based Orders/Judy Lazarus Transition Centre
OZ: International Student
M: Prisoner
YTC: Young People Transitioning From Care – Concession
YTN: Young People Transitioning From Care - No Concession
Short courses

student contact hours

Total hours^	Indicative hours*	Government Subsidised $/SCH	Indigenous Concession $/SCH	Full fee $/SCH
380	380	$0.00	$0.00	$9.00

^This is based on the maximum number of student contact hours for the total duration of the course. Hours may vary depending on electives chosen by the student.

*This is based on the maximum number of student contact hours for the calendar year of 2019. Hours may vary depending on electives chosen by the student. If you have to undertake training as part of Skills Recognition, your tuition fees are charged according to the applicable rate per Student Contact Hour depending on your eligibility for government subsidised, concession or full fees.

For more information about our fees structure, click here.

What costs and other fees should I expect?

Contact the Contact Centre on 13 TAFE (13 8233) or enquiries@kangan.edu.au for a fee schedule. There may be extra costs for reference books, protective clothing or specialised materials.

Can I apply?

This course is available through the apprenticeship and traineeship pathway. You are eligible if you are employed or have been offered a new apprenticeship or traineeship in your chosen field. Also, it is recommended that you have satisfactory numeracy and literacy skills to undertake this course or are mature age and have sufficient work experience to successfully undertake the course. OR You may apply if you have satisfactorily completed VCE or an approved equivalent course and the satisfactory completion of the work requirements (eligibility to transfer); or are mature age and have sufficient work experience to successfully undertake the course. (Mature age is anyone over the age of 18 who has been out of full-time education for more than 12 months.)

Where and how can I study?

You will study at the Docklands Campus.

What employment opportunities will I have?

This course may lead you to work with an employer in the Automotive Industry, specifically with light vehicles, or eventually running your own business.

What qualifications will I receive?

On successful completion of the course you will be awarded the (full course title). As part of the Australian Qualifications Framework this program is nationally recognised.

What opportunities for further studies will I have?

Credit transfers may be available into related Certificate III or IV courses.

How do I apply?

Apprentice/Trainees - You will need to have an employer and then contact an Australian Apprentice Support Network office to sign a training contract.

Non- Apprentices - To apply for this course you must fill in a direct application form through the "Apply Now" button above. We will then be in contact to arrange an interview or provide the information session details.

How will I be selected for this course?

You must be currently employed as an apprentice/trainee in the respective field of specialisation.